
Item No.: HS
High Speed Actuator
High Speed Series Linear Actuators can reach 10mm/s-20mm/s and the Max. Thrust is 1500N. They are used in high speed working area.
Specification of High Speed Series Linear actuators:
◇ Max. Thrust: 1500N
◇ Voltage:24VDC or 12VDC, Permanent Magnet Motor Drive
◇ Standard stroke: 50 ~ 350 mm, special stroke are
available according to customer' requirement.
◇ Rated load speed: 10mm/s ~ 20mm/s
◇ Duty cycle:10%
◇ Ambient temperature -5°C (23F) to +40°C (104F)
◇ Standard protection class :IP 51
◇ Built-in integral limit switch, not adjustable after leaving factory
◇ High strength plastic housing
◇ Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.
◇ Overload protection
◇ CE Certificated