Item No.: AT
AT Series Linear Actuators
AT Series Linear Actuators are widely used in Adjustable beds, Medical beds, Wheel chairs, Patient hoists, Table height adjustments, Industry mechanical instruments and so on.
AT Series Linear Actuators are widely used in Adjustable beds, Medical beds, Wheel chairs, Patient hoists, Table height adjustments, Industry mechanical instruments and so on.
Specification of AT Series Linear actuators:
◇ Max. Thrust: 4000N, 6000N, 8000N
◇ Voltage:24VDC or 12VDC, Permanent Magnet Motor Drive
◇ Standard stroke: 100 / 150 / 200 / 250 / 300 / 350 / 400 mm, special stroke are
available according to customer' requirement.
◇ Duty cycle:10%
◇ Ambient temperature -5°C (23F) to +40°C (104F)
◇ Standard protection class :IP 54
◇ Built-in integral limit switch, not adjustable after leaving factory
◇ Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.
◇ Overload protection
◇ CE Certificated
◇ Availability in Black, White and Blue housing.
Standard Stroke and Min. Install Dimension
| Standard Stroke mm | <110 | 150 | 200 | 250 | 300 | 350 | 400 | |
| Min. Install Dimension mm | AT4000 AT6000 | >285 | 325 | 375 | 425 | 475 | 525 | 575 |
| AT8000 | >325 | 325 | 375 | 425 | 475 | 525 | 575 | |
Technical Specification
| Item No. | Max. Thrust (N) | Max. Pull (N) | Self-Lock(N) | Speed (mm/s) | Duty Cycle (min/h) | Current at full load (A) | |
| Full load | No load | ||||||
| AT4000 | 4000 | 3000 | 4000 | 5 | 6.5 | 6 | 3.3 |
| AT6000 | 6000 | 3000 | 6000 | 4.2 | 6.2 | 6 | 3.8 |
| AT8000 | 8000 | 5000 | 6000 | 5 | 6.5 | 6 | 6 |
